VTAF Vertical Tracking Angle on the Fly

PETE RIGGLE Audio Engineering

VTAF Variations

TONE ARMS TO WHICH THE VTAF HAS BEEN ADAPTED:

The VTAF was developed for post mounted Rega tonearms (the RB250, the RB300 and the RB600). We have since adapted the VTAF to all of the three point mount Rega tonearms (RB251, RB301, RB700, RB900, and RB1000). In addition, we can provide VTAF units for the post mounted arms of most manufacturers. The range of VTAF variations has been extended to accept arms with post diameters ranging from the smallest up to of 1.127 inches (28.6 mm). Examples are included below. Chances are good that we can provide a VTAF for your arm. If you do not see your tone arm, please inquire. As you can see from the listing below, we can mount almost any arm to almost any table using the VTAF.

The VTAF is not suitable for use with Graham or Tri-Planer arms, which have mounting systems substantially offset from the center of gravity of the tonearm assembly. The VTAF is not suitable for use with straight line tracking arms.

Arms to which the VTAF has been adapted are listed below. Again, please let us know if you do not see your arm listed. Telephone: 509 582 4548 email: peteriggle@msn.com

VTAF for Rega post mounted arms including RB250, RB300 and RB600, Origin Live OL1 tone arm, Origin Live Silver arm, Moth Audio RB250, and derivatives of the RB250, RB300, and RB600:
$150.00 U.S. in Lacquered Brass finish. Add $30 U.S. for VTAF Teflon Upgrade. Add $30 U.S. for Smokey Silver finish.

VTAF for Rega 3 Point Mount arms including RB301, RB700, RB900, and RB1000:

$180 U.S. in engine turned Lacquered Brass finish. Add $30 U.S. for VTAF Teflon Upgrade. Add $30 U.S. for Smokey Silver finish.

VTAF for Rega post mounted arms (RB250, RB300, RB301) on Nottingham Spacedeck using VTAF mini extension plate to mount VTAF Guide Assembly:
$170 U.S., including mini extension plate. Add $30 U.S. for VTAF Teflon Upgrade. Add $35 for Smokey Silver finish.

VTAF for ADC arm:
$200 U.S. in Lacquered Brass finish. Add $30 U.S. for VTAF Teflon Upgrade. Add $30 U.S. for Smokey Silver finish.

VTAF for Alphason HRS100 MCS ARM:
$210 U.S. in Lacquered Brass finish. Add $30 U.S. for VTAF Teflon Upgrade. Add $30 U.S. for Smokey Silver finish.

VTAF for Audio Technica Model 1007 arm:
$180 U.S. in Lacquered Brass finish. Add $30 U.S. for VTAF Teflon Upgrade. Add $30 U.S. for Smokey Silver finish.

VTAF for Audioquest arms:
$180 U.S. in Lacquered Brass finish. Add $30 U.S. for VTAF Teflon Upgrade. Add $30 U.S. for Smokey Silver finish.

VTAF for DaVinci tonearm:
$180 U.S. in Lacquered Brass Finish. Add $30 U.S. for VTAF Teflon Upgrade. Add $30 U.S. for Smokey Silver finish.

VTAF for Hadcock arm:
$200 U.S. in Lacquered Brass finish. Add $30 for VTAF Teflon Upgrade. Add $30 for optional Smokey Silver finish.

VTAF for Linn Itokk LVII with 25 mm diameter mounting post:
$190 U.S. in Lacquered Brass finish. Add $30 for VTAF Teflon Upgrade. Add $30 for Smokey Silver finish.

VTAF for Linn Ittok LVII with 21 mm diameter mounting post:
$210 U.S. in Lacquered Brass finish. Add $30 for VTAF Teflon Upgrade. Add $30 for Smokey Silver finish.

VTAF for Moerch (Morch) UKP4 or DP4 arm:
$200 U.S. in Lacquered Brass Finish. Add $30 U.S. for VTAF Teflon Upgrade. Add $30 U.S. for Smokey Silver finish.

VTAF for Nottingham Tonearms on non-Nottingham Tables:
This is for arms with the mounting geometry of the Spacearm, the Ace Space arm, and the Mentor arm.
$190 U.S. in the Lacquered Brass Finish. Add $30 U.S. for VTAF Teflon Upgrade

Enter supporting content here